Showing posts with label 3Dscanning. Show all posts
Showing posts with label 3Dscanning. Show all posts

Sunday, February 23, 2014

Tim Kent : Winter Quarter Post 1

     This is a sculpture I designed a few years ago, and originally carved in plaster. Since then, the 2D drawing has been a basis for my sculptural work. This is to say, all my sculptures are a transformation from the original 2D paper drawing. I was excited to be able to take this practice into the 3D world. Using the 3D scanner, I was able to trace a foam maquette into the computer, and after a few hours of cleaning up the file, it was ready to be played with in Rhino. I am excited to now be able to morph the form dimensionally, rather than being confined to the limitations of 2D rendering. 


     One of the first things I did in Rhino was learn how to contour the form. This was a fundamental step for learning how to Serial slice an object. One I had a contour drawing of the sculpture, I went into the perspective mode of Rhino and used the command "draw 2d". This created a drawing of the contours in the prospect I was looking at it. I was then able to laser engrave this image using the laser cutter.


     Finally, I got my pieces back from the laser cutter, and it was time to put them together. Here you can see that process. In my following post I will show some more completed works. Digital applications of sculpture has been really interesting so far and a nice break from oil painting. I am excited to see how it will influence my art.


More of my work, including oil painting, drawing, sculpture, mixed media, and replicas can be viewed on my website: www.timkentart.com

Tim Kent

Wednesday, October 9, 2013

Serial Slicing - Cardboard Federico Villa

Once the 63 individual sliced were laser cut it was just a matter of stacking them together and gluing them, and of course move to go along with the process :)
 The beauty about working with cardboard, in my opinion, is that it is an inexpensive way to show form and volume, but if you see it from the perspective of the structural support (interior) it can look almost transparent or show the interior structure perfectly.
I was very happy to see the finished piece and actually experience the power of 3D scanning.

Monday, September 30, 2013

Daniela Guarin 3D Scanning and Rendering

My inspiration for the model I did was Flamenco. The movement of the skirt and the pose that the dancer acquires while perfoming.



The result was an organic and light sculpture, that is delicate and dynamic.
This is the original sculptey model with the alignment dots 



This is my original scan, after I converted into an
OBJ file and export it from RapidWorks to Rhino.


View from the other side


I reduced the amount of polys in my model. This
was done in rapidworks. This one is a wireframe view of a 1000-poly
model
Same 1000-poly model in a ghosted view
This model have 5000 polys. Wireframe view
Later I exported the original model into keyshot to experiment with texture.
Model in Thread texture.
 Model in rust texture
Model in brass texture


Sunday, September 29, 2013

Eddie Holecko: Project One, Digital Cleanup


Once the model was exported to an obj from RapidWorks, I imported the model into zbrush to clean up the polygons. 

Original geometry
Using the Dynamesh command in Zbrush, I evenly dispersed the polys throughout the object resulting in a much cleaner mesh. 

Dynamesh Model

I used Dynamesh in Z-brush to create several different high resolution and low resolution versions of the object.

29K polycount (left), 72k polycount (right)

191K polycount (left), 470k polycount (right)
After the model was exported as several obj files, I imported the low poly object into maya and experimented with creating a wire frame version.

maya screenshot, low poly obj

low poly obj (left),  reduced poly wire frame geometry (right)




Eddie Holecko: Project One, Process Photos

For this project, taking inspiration from H.R. Giger, I created a small WED clay sculpture.  The sculpt is roughly 4" tall so it works well with the 3D scanner's short range focus.  

roughed out creature sculpt


roughed out creature sculpt

refined creature sculpt

refined creature sculpt

refined creature sculpt-profile


rough creature sculpt back view

Next, the sculpt was sprayed with Kryolan Crystal Clear to seal the detail during the scanning process. The quick creature sculpt was then taken to the scanner.  I added several tracking points which make combining the geometry from each scan easier. 

Sculpture, with tracking points, mounted to the scanner.
Sculpture, with tracking points, mounted to the scanner.
Positioning the sculpture is very important in order to receive a clean scan. If the sculpt/object is not in focus then the scanner does not read the geometry. 
The scanner doing its magic
The scanner and  a glimpse at the Scan Studios interface

 In order to capture enough of the sculpture to work with in Rapid Works, Zbrush and Maya, I had to scan the object 360 degrees from three different positions.

Re-positioned sculpture
After the sculpture was scanned, I combined the scans from multiple angles to create one mesh.  I also cleaned up the geometry and cut out the metal pole that appeared in the scan. Then I imported the mesh into Rapid Works, where I patched a few holes in the geometry.  After the mesh was fused to one and completely patched, I exported an obj file.

Next, I imported the obj to Zbrush in order to clean up the geometry.  More information on mesh clean-up coming soon!






Wednesday, September 25, 2013

Briana Mateo: Inspiration and Scanned Images

 
This is the process of how I made my clay man scan. Here is one of my sketches.
 
 
I started off with wood, aluminum foil and clay.
 


 
After it was made out of clay, I painted it white so the scanner could read it better.
 
 
 
 
 
 
Here are some images of some of my scans. In order to put the images taken by Rapid Works, I drew dots that would help put the images together.
 
 
 
Here are some photos of my serial stacked object next to the clay man.
 

 
 

Wednesday, April 4, 2012

Sami Lee Woolhiser: Bird Scan Studio

This is my first post for this quarter! Here is my experience with Scan Studio so far.
First Scan
It is possible to transfer a 3 dimensional object in real space to virtual 3D space! Amazing! The 3D scanner traces the object, such in the image above where it scans on a 360 degree rotation taking pictures at a set number of intervals (10). Then I find corresponding points within those images that then align them in the program, Scan Studio, where it gives a virtual 3D object like the one below.

First Scan on Scan studio

Aligning two groups of scans (scan families)
 By scanning from a different angle of the bird I was allowed to fill in the holes created by the first scan, because it does not see segments that are perpendicular to it, with a second group of images (a second scan family.) Bellow is an image of the second scan in which the angle of the bird allows the scanner to see parts it couldn't in the first scan. Above is an image where I aligned the two scan families to create one happy little sleeping bird. 

Second Scan

two merged scans
 Above is the two scan families which are now aligned, below is an image of the multiple layers of images fused together. The red highlighted portion is the parts that I trimmed, removing the unnecessary parts the scanner picked up during the scanning process.
Trimming extra segments